XC2C256-5FT256C
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 256 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.9V |
| Temperature Grade | COMMERCIAL |
| Number of I/O | 184 |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 268MHz |
| Organization | 0 DEDICATED INPUTS, 184 I/O |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
XC2C256-5FT256C Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is equipped with 184I/O ports.Terminations of devices are set to [0].This electrical component has a terminal position of 0.It is powered by a voltage of 1.8V volts.It belongs to the family [0].A chip with 256pins is programmed.For high efficiency, the supply voltage should be maintained at [0].This board has 256 pins.1.9Vrepresents the maximal supply voltage (Vsup).It is recommended that the operating temperature be greater than 0°C.Temperatures should not exceed 70°C.16logic blocks (LABs) make up this circuit.There should be a lower maximum frequency than 268MHz.This kind of FPGA is composed of FLASH PLD.
XC2C256-5FT256C Features
184 I/Os
256 pin count
256 pins
16 logic blocks (LABs)
XC2C256-5FT256C Applications
There are a lot of Xilinx XC2C256-5FT256C CPLDs applications.
- Software-Driven Hardware Configuration
- INTERRUPT SYSTEM
- Software Configuration of Add-In Boards
- Complex programmable logic devices
- USB Bus
- PLC analog input modules
- Power automation
- Wide Vin Industrial low power SMPS
- DMA control
- POWER-SAVING MODES
