XC2C256-6FTG256C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | REAL DIGITAL DESIGN TECHNOLOGY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 184 |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6000 |
| Max Frequency | 256MHz |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5.7ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
XC2C256-6FTG256C Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 256-LBGA.In this case, there are 184 I/Os programmed.Terminations of devices are set to [0].There is a BOTTOMterminal position on the electrical part in question.The power supply voltage is 1.8V.It belongs to the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.This type of FPGA is a part of the CoolRunner II series.It is programmed with 256 pins.This device can also display [0].The XC2C256indicates that related parts can be found.A digital circuit can be constructed using 6000gates.The supply voltage should be maintained at 1.8V for high efficiency.Surface Mountmounts this electronic component.A voltage of 1.9V is the maximum supply voltage for this device.The minimal supply voltage is 1.7V.It should be below 256MHzat the maximal frequency.There are 16 logic elements/cells to form a fundamental building block.
XC2C256-6FTG256C Features
256-LBGA package
184 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
XC2C256-6FTG256C Applications
There are a lot of Xilinx Inc. XC2C256-6FTG256C CPLDs applications.
- Storage Cards and Storage Racks
- Address decoding
- USB Bus
- Cross-Matrix Switch
- Timing control
- Power Meter SMPS
- Reset swapping
- Auxiliary Power Supply Isolated and Non-isolated
- PLC analog input modules
- Address decoders
