XC2C32A-6CPG56I
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | REAL DIGITAL DESIGN TECHNOLOGY |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C32A |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 33 |
| Memory Type | ROMless |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 750 |
| Max Frequency | 200MHz |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5.5ns |
| Height Seated (Max) | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
XC2C32A-6CPG56I Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 33 I/Os.The termination of a device is set to [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.The power supply voltage is 1.8V.This part is included in Programmable Logic Devices.Trayis the packaging method.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the CoolRunner IIseries contain this type of chip.In this chip, the 56pins are programmed.If this device is used, you will also be able to find [0].XC2C32Acontains its related parts.A digital circuit can be constructed using 750gates.High efficiency requires a voltage supply of [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].It operates with the maximal supply voltage of 1.9V.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.It is important to make sure that the maximum frequency is less than 200MHz.There are 2 logic elements/cells to form a fundamental building block.
XC2C32A-6CPG56I Features
56-LFBGA, CSPBGA package
33 I/Os
The operating temperature of -40°C~85°C TA
56 pin count
56 pins
XC2C32A-6CPG56I Applications
There are a lot of Xilinx Inc. XC2C32A-6CPG56I CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Complex programmable logic devices
- Protection relays
- Synchronous or asynchronous mode
- Bootloaders for FPGAs
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
- Software-Driven Hardware Configuration
- Pattern recognition
