XC2C32A-6VQG44C
| Parameters | |
|---|---|
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Additional Feature | REAL DIGITAL DESIGN TECHNOLOGY |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C32A |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 33 |
| Memory Type | ROMless |
| Propagation Delay | 6 ns |
| Turn On Delay Time | 6 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 750 |
| Max Frequency | 200MHz |
| Speed Grade | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5.5ns |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
XC2C32A-6VQG44C Overview
There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with 44-TQFP.This device has 33 I/O ports programmed into it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 1.8V is used to power it.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.FPGAs belonging to the CoolRunner IIseries contain this type of chip.It has 44pins programmed.The device can also be used to find [0].XC2C32Acontains its related parts.In digital circuits, there are 750gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].In this case, ROMlesswill be used to store the data.Surface Mountis used to mount this electronic component.This board has 44 pins.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.Ideally, the maximal frequency should be lower than 200MHz Hz.Fundamental building blocks consist of 2logic elements/cells.
XC2C32A-6VQG44C Features
44-TQFP package
33 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
XC2C32A-6VQG44C Applications
There are a lot of Xilinx Inc. XC2C32A-6VQG44C CPLDs applications.
- Page register
- ON-CHIP OSCILLATOR CIRCUIT
- Custom state machines
- Software-Driven Hardware Configuration
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PLC analog input modules
- Reset swapping
- Parity generators
- Power automation
