XC2C384-10FTG256I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C384 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 212 |
| Memory Type | ROMless |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 24 |
| Number of Gates | 9000 |
| Max Frequency | 125MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 9.2ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC2C384-10FTG256I Overview
384macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.In the 256-LBGApackage, you will find it.There are 212 I/Os on the board.256terminations are programmed into the device.There is a BOTTOMterminal position on the electrical part in question.An electrical supply voltage of 1.8V is used to power it.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].The chip should be mounted by Surface Mount.It belongs to the CoolRunner IIseries of FPGAs.256pins are programmed on the chip.The device can also be used to find [0].There are related parts in [0].It is possible to construct digital circuits using 9000gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].In this case, Surface Mountis used to mount the electronic component.The pins are [0].This device operates at a voltage of 1.9Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 1.7VV.It is important to make sure that the maximum frequency is less than 125MHz.A fundamental building block of logic consists of 24logic elements/cells.
XC2C384-10FTG256I Features
256-LBGA package
212 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
XC2C384-10FTG256I Applications
There are a lot of Xilinx Inc. XC2C384-10FTG256I CPLDs applications.
- Field programmable gate
- Bootloaders for FPGAs
- Dedicated input registers
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Page register
- Wide Vin Industrial low power SMPS
- High speed graphics processing
- Handheld digital devices
- I/O PORTS (MCU MODULE)
- Address decoders
