XC2C512-10FTG256C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Termination | SMD/SMT |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Frequency | 179MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C512 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 212 |
| Propagation Delay | 7.1 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Gates | 12000 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 9.2ns |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XC2C512-10FTG256C Overview
In the mobile phone network, there are 512macro cells, which are cells with high-power antennas and towers.In the 256-LBGApackage, you will find it.The device has 212inputs and outputs.256terminations have been programmed into the device.This electrical part has a terminal position of BOTTOMand is connected to the ground.The power source is powered by 1.8Vvolts.It is included in Programmable Logic Devices.Trayshould be used for packaging the chip.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The CoolRunner IIseries FPGA is one of these types.There are 256 pins on the chip.If you use this device, you will also find [0].The XC2C512indicates that related parts can be found.12000gates are devices that serve as building blocks for digital circuits.High efficiency requires a voltage supply of [0].This electronic part is mounted in the way of Surface Mount.There are 256pins on it.There is a maximum supply voltage of 1.9V.A minimum supply voltage of 1.7V is required for this device to operate.There is a maximum frequency of 179MHz.Fundamental building blocks consist of 32logic elements/cells.
XC2C512-10FTG256C Features
256-LBGA package
212 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
256 pins
XC2C512-10FTG256C Applications
There are a lot of Xilinx Inc. XC2C512-10FTG256C CPLDs applications.
- INTERRUPT SYSTEM
- State machine design
- Configurable Addressing of I/O Boards
- Timing control
- Cross-Matrix Switch
- Interface bridging
- DDC INTERFACE
- Software-Driven Hardware Configuration
- I2C BUS INTERFACE
- Software Configuration of Add-In Boards
