XC2C512-10FTG256I
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2000 |
| Series | CoolRunner II |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C512 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 212 |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Gates | 12000 |
| Max Frequency | 128MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 9.2ns |
| Height | 1mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
XC2C512-10FTG256I Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the 256-LBGA package.It is programmed with 212 I/Os.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 1.8Vvolts.It is a part of the family [0].It is packaged in the way of Tray.To ensure its reliability, the operating temperature is set to [0].Chips should be mounted by Surface Mount.FPGAs belonging to the CoolRunner IIseries contain this type of chip.It is equipped with 256 pin count.When using this device, YESis also available.XC2C512contains its related parts.As a building block for digital circuits, there are 12000gates.High efficiency requires a voltage supply of [0].In this case, Surface Mountis used to mount the electronic component.There are 256pins on it.There is a maximum supply voltage of 1.9Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 1.7VV.It is recommended that the maximal frequency be lower than 128MHz.As a fundamental building block, there are 32 logic elements/cells.
XC2C512-10FTG256I Features
256-LBGA package
212 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
XC2C512-10FTG256I Applications
There are a lot of Xilinx Inc. XC2C512-10FTG256I CPLDs applications.
- State machine control
- Address decoding
- Programmable polarity
- Synchronous or asynchronous mode
- Address decoders
- Portable digital devices
- Complex programmable logic devices
- Preset swapping
- Boolean function generators
- STANDARD SERIAL INTERFACE UART
