XC2C64A-7VQG100I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | CoolRunner II |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REAL DIGITAL DESIGN TECHNOLOGY |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2C64A |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of I/O | 64 |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 159MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 6.7ns |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
XC2C64A-7VQG100I Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.You can find it in package [0].The device is programmed with 64 I/Os.100terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 1.8V volts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.In FPGA terms, it is a type of CoolRunner IIseries FPGA.With 100pins programmed, the chip is ready to use.This device can also display [0].The XC2C64Aindicates that its related parts can be found.As a building block for digital circuits, there are 1500gates.It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.This electronic part is mounted in the way of Surface Mount.A total of 100pins are provided on this board.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.Ideally, the maximal frequency should be lower than 159MHz Hz.There are 4 logic elements/cells on the device.
XC2C64A-7VQG100I Features
100-TQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
XC2C64A-7VQG100I Applications
There are a lot of Xilinx Inc. XC2C64A-7VQG100I CPLDs applications.
- Software-Driven Hardware Configuration
- POWER-SAVING MODES
- Protection relays
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- State machine control
- Programmable power management
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- DDC INTERFACE
- Power automation
- Multiple Clock Source Selection
