XC2V250-4FG256I
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2007 |
| Series | Virtex®-II |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.425V~1.575V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC2V250 |
| Pin Count | 256 |
| Number of Outputs | 172 |
| Operating Supply Voltage | 1.5V |
| Power Supplies | 1.51.5/3.33.3V |
| Number of I/O | 172 |
| RAM Size | 54kB |
| Clock Frequency | 650MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Total RAM Bits | 442368 |
| Number of Gates | 250000 |
| Number of LABs/CLBs | 384 |
| Speed Grade | 4 |
| Number of Registers | 3072 |
| Number of CLBs | 384 |
| Height Seated (Max) | 2mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
XC2V250-4FG256I Overview
The package that contains this software is called 256-BGA. FIELD PROGRAMMABLE GATE ARRAY is the component of this type of FPGA. There are 172 I/Os for better data transfer. It is powered from a supply voltage of 1.5V. A Field Programmable Gate Arrays-series FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. Powered by a 1.425V~1.575V supply voltage, fpga chips is able to operate at high speeds. FPGAs belonging to the Virtex?-II series are a type of FPGA that belong to the Virtex?-II series of FPGAs. Fpga chips is important to maintain the operating temperature wFpga chipshin the range of -40°C~100°C TJ when operating the machine. With this device, you will be able to make use of 172 outputs. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. 256 terminations are present in total. The RAM bits that are offered by this fpga chips are 442368. Its base part number XC2V250 can be used to find parts that are related to it. It is crucial that the RAM si54kBe of this FPGA module reaches 54kB so that the program can run normally. Fpga electronics is designed wfpga electronics h 256 pins. The FPGA is built as an array of 384 latches or CLBs. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. A 1.5V-volt supply allows designers to fully utilize its flexibility. There is a 1.51.5/3.33.3V power supply that is required to operate it. Its basic building block contains 250000 gates. With a total of 256 pins, it is equipped with a high level of security. A crystal oscillating at 650MHz is one of the most common components of this device. The registers used in the transfer of and storage of data are 3072 in number. Its architecture is based on 384 CLBs.
XC2V250-4FG256I Features
172 I/Os
Up to 442368 RAM bits
256 LABs/CLBs
3072 registers
XC2V250-4FG256I Applications
There are a lot of Xilinx Inc. XC2V250-4FG256I FPGAs applications.
- Security systems
- Camera time adjustments
- Artificial intelligence (AI)
- Cryptography
- Industrial Ethernet
- Data center search engines
- OpenCL
- Automotive Applications
- Wired Communications
- Software-defined radios
