XC3S1000-4FG676C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 676-BBGA, FCBGA |
| Number of Pins | 676 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2006 |
| Series | Spartan®-3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 676 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC3S1000 |
| Pin Count | 676 |
| Number of Outputs | 391 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.32.5V |
| Number of I/O | 391 |
| RAM Size | 54kB |
| Clock Frequency | 630MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 17280 |
| Total RAM Bits | 442368 |
| Number of Gates | 1000000 |
| Number of LABs/CLBs | 1920 |
| Speed Grade | 4 |
| Combinatorial Delay of a CLB-Max | 0.61 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
XC3S1000-4FG676C Overview
Fpga chips is supplied in the 676-BBGA, FCBGA package. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. The I/Os are designed to facilitate a more coherent transfer of data. A fundamental building block consists of 17280 logic elements/cells. In order to operate fpga chips, a voltage supply of 1.2V volts is required. A Field Programmable Gate Arrays-series FPGA part. An FPGA module can be attached to a development board with a Surface Mount-pin. Powered by a 1.14V~1.26V supply voltage, fpga chips is able to operate at high speeds. This is a type of FPGA that is part of the Spartan?-3 series of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~85°C TJ when operating. The device has 391 outputs that are integrated into it. It is for space saving reasons that this FPGA model is contained in Tray. In total, the terminations of this piece are 676. As far as the RAM bits are concerned, this device offers you a total of 442368. Related parts can be found by using its base part number XC3S1000. This FPGA module has a RAM si54kBe of 54kB that is sufficient to make sure that the program is able to run normally. This cable has 676 pins and is designed to connect to a computer. The FPGA is built as an array of 1920 latches or CLBs. As long as this FPGA is mounted in Surface Mount, it could work fantastically according to its specifications. In operation with 1.2V, designers can take advantage of its flexibility to the fullest extent. The device runs on a 1.21.2/3.32.5V battery and requires no additional power supply to operate. Among its basic building blocks, there are 1000000 gates that are included in it. Fpga semiconductor is equipped wfpga semiconductorh 676 pin count. Typically, it uses a crystal oscillating at 630MHz in order to operate.
XC3S1000-4FG676C Features
391 I/Os
Up to 442368 RAM bits
676 LABs/CLBs
XC3S1000-4FG676C Applications
There are a lot of Xilinx Inc. XC3S1000-4FG676C FPGAs applications.
- Embedded Vision
- DO-254
- Integrating multiple SPLDs
- Data center hardware accelerators
- Automotive advanced driver assistance systems (ADAS)
- Medical Electronics
- Distributed Monetary Systems
- Image processing
- Medical ultrasounds
- Data center search engines
