XC3S1500-4FG676I
| Parameters | |
|---|---|
| Number of Pins | 676 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2005 |
| Series | Spartan®-3 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 676 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC3S1500 |
| Pin Count | 676 |
| Number of Outputs | 487 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.32.5V |
| Number of I/O | 487 |
| RAM Size | 72kB |
| Clock Frequency | 630MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 29952 |
| Total RAM Bits | 589824 |
| Number of Gates | 1500000 |
| Number of LABs/CLBs | 3328 |
| Speed Grade | 4 |
| Combinatorial Delay of a CLB-Max | 0.61 ns |
| Height Seated (Max) | 2.6mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 676-BBGA, FCBGA |
XC3S1500-4FG676I Overview
As part of the 676-BBGA, FCBGA package, it is included. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. Fpga chips is programmed wFpga chipsh 487 I/Os for transferring data in a more coherent manner. A fundamental building block is made up of 29952 logic elements/cells. 1.2V volts power it. An FPGA part from the Field Programmable Gate Arrays family. An attachment Surface Mount allows the FPGA module to be attached to the development board. In order for it to operate, the supply voltage must be 1.14V~1.26V . The Spartan?-3 series FPGA is a type of FPGA that belongs to the Spartan?-3 family of FPGAs. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~100°C TJ at all times. In this device, there are 487 outputs that can be used. Using the Tray layout, this FPGA model can be contained in a very small amount of space. In total, it has 676 terminations on each end. As far as the RAM bits are concerned, this device offers you a total of 589824. For related parts, use its base part number XC3S1500. It is crucial that the RAM si72kBe of this FPGA module reaches 72kB so that the program can run normally. 676 pins are designed into the device. 3328 LABs and CLBs are built into this FPGA. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Surface Mount. Designers can fully utilize its flexibility with 1.2V supply voltage. Power is provided by a 1.21.2/3.32.5V battery that is included with the device. Among its basic building blocks, there are 1500000 gates that are included in it. Fpga semiconductor is equipped wfpga semiconductorh 676 pin count. Typically, fpga semiconductor uses a crystal oscillating at 630MHz .
XC3S1500-4FG676I Features
487 I/Os
Up to 589824 RAM bits
676 LABs/CLBs
XC3S1500-4FG676I Applications
There are a lot of Xilinx Inc. XC3S1500-4FG676I FPGAs applications.
- Space Applications
- Consumer Electronics
- Cryptography
- Device controllers
- DO-254
- Ecosystem
- Medical imaging
- ASIC prototyping
- Wired Communications
- Software-defined radio
