XC3S200A-4VQG100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2007 |
| Series | Spartan®-3A |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC3S200A |
| Pin Count | 100 |
| Number of Outputs | 62 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.33.3V |
| Number of I/O | 68 |
| RAM Size | 36kB |
| Clock Frequency | 667MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 4032 |
| Total RAM Bits | 294912 |
| Number of Gates | 200000 |
| Number of LABs/CLBs | 448 |
| Speed Grade | 4 |
| Combinatorial Delay of a CLB-Max | 0.71 ns |
| Number of CLBs | 448 |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
XC3S200A-4VQG100C Overview
As part of the 100-TQFP package, it is included. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. A total of 68 I/Os allow data to be transferred in a more coherent manner. To form a fundamental building block, there are 4032 logic elements/cells. 1.2V volts power it. FPGA parts like this belong to the Field Programmable Gate Arrays family. The Surface Mount-slot on the development board allows you to attach the FPGA module. In order to operate it, it requires a voltage supply of 1.14V~1.26V . The FPGA belongs to the Spartan?-3A series of FPGAs, and it is one type of FPGA. During the operation of the system, the operating temperature should remain within the range of 0°C~85°C TJ. A device such as this one has 62 outputs built into it. There is an FPGA model contained in Tray in order to conserve space. The total number of terminations is 100. A device like this one offers 294912 RAM bits, which is a considerable amount of memory. In order to find related parts, use the part number XC3S200A as a base. Fpga electronics is important that this FPGA module has a RAM si36kBe of 36kB in order to ensure that the program will run normally. It has a total of 100 pins that are designed for it. This FPGA is built as an array of 448 LABs/CLBs. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. A 1.2V-volt supply allows designers to fully utilize its flexibility. It is powered by a 1.21.2/3.33.3V battery, which can be purchased separately. Among its basic building blocks, there are 200000 gates that are included in it. This device has a pin count of 100 in fpga semiconductor. Fpga semiconductor typically uses a crystal oscillating at 667MHz. Its architecture is based on 448 CLBs.
XC3S200A-4VQG100C Features
68 I/Os
Up to 294912 RAM bits
100 LABs/CLBs
XC3S200A-4VQG100C Applications
There are a lot of Xilinx Inc. XC3S200A-4VQG100C FPGAs applications.
- Aerospace and Defense
- Medical Applications
- Telecommunication
- Distributed Monetary Systems
- Aircraft navigation
- Wired Communications
- Software-defined radios
- Data center hardware accelerators
- Automotive driver's assistance
- Scientific Instruments
