XC3S200A-4VQG100I
| Parameters | |
|---|---|
| Series | Spartan®-3A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 1.14V~1.26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC3S200A |
| Pin Count | 100 |
| Number of Outputs | 62 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.21.2/3.33.3V |
| Number of I/O | 68 |
| RAM Size | 36kB |
| Clock Frequency | 667MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 4032 |
| Total RAM Bits | 294912 |
| Number of Gates | 200000 |
| Number of LABs/CLBs | 448 |
| Speed Grade | 4 |
| Combinatorial Delay of a CLB-Max | 0.71 ns |
| Number of CLBs | 448 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 1999 |
XC3S200A-4VQG100I Overview
In the 100-TQFP package, you will find fpga chips. The FIELD PROGRAMMABLE GATE ARRAY-series of FPGAs are composed of this type. 68 I/Os are available for transferring data more efficiently. In order to construct a fundamental building block, 4032 logic elements/cells are required. In order to operate fpga chips, a voltage supply of 1.2V volts is required. There is a Field Programmable Gate Arrays family component in this FPGA part. Using a Surface Mount connector, you can mount this FPGA module on the development board. Fpga chips operates at a voltage of 1.14V~1.26V and uses a battery to supply power. This is a type of FPGA that is part of the Spartan?-3A series of FPGAs. While operating, the operating temperature should be kept within a range of -40°C~100°C TJ. A device such as this one has 62 outputs built into it. Fpga chips is designed to maximiTraye space efficiency by containing the FPGA model in Tray. In total, it has 100 terminations on each end. This device is equipped with 294912 RAM bits in terms of its RAM si294912e. Its base part number XC3S200A can be used to find related parts. The RAM si36kBe of this FPGA module reaches 36kB so as to guarantee the normal operation of the program during operation. In this case, 100 pins are used in the design. A total of 448 LABs/CLBs make up this FPGA array. I think, as long as this FPGA is mounted in Surface Mount, it could perform excellently according to its specifications as long as you mount it in Surface Mount. When operating with the supply voltage of 1.2V, designers can fully make use of its flexibility. The device runs on a 1.21.2/3.33.3V battery and requires no additional power supply to operate. Fpga semiconductor is made up of 200000 gates as fpga semiconductors basic building block. Featuring 100 pins in total, it is a versatile device. Normally, fpga semiconductor uses an oscillator, which oscillates at 667MHz, to create the signal. 448 CLBs are basic modules used for its architecture.
XC3S200A-4VQG100I Features
68 I/Os
Up to 294912 RAM bits
100 LABs/CLBs
XC3S200A-4VQG100I Applications
There are a lot of Xilinx Inc. XC3S200A-4VQG100I FPGAs applications.
- Server Applications
- Medical Applications
- Automation
- Ecosystem
- Wired Communications
- Voice recognition
- Aerospace and Defense
- Consumer Electronics
- Defense Applications
- Secure Communication
