XC7A100T-2FGG676C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 676-BGA |
| Surface Mount | YES |
| Number of Pins | 676 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Artix-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 676 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.95V~1.05V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7A100T |
| Pin Count | 676 |
| Number of Outputs | 300 |
| Qualification Status | Not Qualified |
| Power Supplies | 1V |
| Number of I/O | 300 |
| RAM Size | 607.5kB |
| Clock Frequency | 1286MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 101440 |
| Total RAM Bits | 4976640 |
| Number of LABs/CLBs | 7925 |
| Speed Grade | -2 |
| Number of Registers | 126800 |
| Combinatorial Delay of a CLB-Max | 1.05 ns |
| Height Seated (Max) | 2.44mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
XC7A100T-2FGG676C Overview
In the 676-BGA package, you will find fpga chips. FPGAs of this type consist of FIELD PROGRAMMABLE GATE ARRAY components. A total of 300 I/Os allow data to be transferred in a more coherent manner. To form a fundamental building block, there are 101440 logic elements/cells. Power is provided by a 1V-volt supply. Field Programmable Gate Arrays family FPGA part. By attaching the Surface Mount connector, you can use this FPGA module with your development board. There is a 0.95V~1.05V-volt supply voltage required for the device to operate. This is a type of FPGA that is part of the Artix-7 series of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~85°C TJ when operating. During the installation of this device, 300 outputs were incorporated. In order to save space, this FPGA model has been contained in Tray. In total, it has 676 terminations on each end. The RAM bits that this device offer is 4976640. If you are looking for related parts, you can use the base part number XC7A100T as a starting point. It is crucial that the RAM si607.5kBe of this FPGA module reaches 607.5kB so that the program can run normally. This cable has 676 pins and is designed to connect to a computer. This FPGA is built as an array of 7925 LABs/CLBs. There is a 1V power supply that is required to operate it. This device has a pin count of 676 in fpga semiconductor. Most commonly, this device makes use of an oscillating crystal frequency of 1286MHz to operate. Fpga semiconductor is important to note that the data is stored and transferred in 126800 different registers.
XC7A100T-2FGG676C Features
300 I/Os
Up to 4976640 RAM bits
676 LABs/CLBs
126800 registers
XC7A100T-2FGG676C Applications
There are a lot of Xilinx Inc. XC7A100T-2FGG676C FPGAs applications.
- Random logic
- Medical Electronics
- Video & Image Processing
- Voice recognition
- Integrating multiple SPLDs
- Automotive advanced driver assistance systems (ADAS)
- Secure Communication
- Wireless Communications
- Aerospace and Defense
- Wired Communications
