XC7A200T-1FFG1156I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 1156-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Artix-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.95V~1.05V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7A200T |
| JESD-30 Code | S-PBGA-B1156 |
| Number of Outputs | 500 |
| Qualification Status | Not Qualified |
| Power Supplies | 1V |
| Memory Size | 1GB |
| Number of I/O | 500 |
| RAM Size | 1.6MB |
| Memory Type | DDR3 |
| Clock Frequency | 1098MHz |
| Number of Inputs | 500 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 215360 |
| Total RAM Bits | 13455360 |
| Number of LABs/CLBs | 16825 |
| Speed Grade | -1 |
| Number of Registers | 269200 |
| Combinatorial Delay of a CLB-Max | 1.27 ns |
| Height Seated (Max) | 3.1mm |
| Length | 35mm |
| Width | 35mm |
| RoHS Status | ROHS3 Compliant |
XC7A200T-1FFG1156I Overview
The package that contains this software is called 1156-BBGA, FCBGA. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. A total of 500 I/Os are programmed to ensure a more coherent data transfer. In order to construct a fundamental building block, 215360 logic elements/cells are required. Fpga chips is powered from a supply voltage of 1V. The Field Programmable Gate Arrays family of FPGA parts includes this part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. In order to operate it, it requires a voltage supply of 0.95V~1.05V . It is a type of FPGA belonging to the Artix-7 seies. During the operation of the system, the operating temperature should remain within the range of -40°C~100°C TJ. A device such as this one has 500 outputs built into it. It is for space saving reasons that this FPGA model is contained in Tray. This device has 13455360 RAM bits, which is the number of RAM bits that this device offers. In order to find related parts, use the part number XC7A200T as a base. For the program to work properly, the RAM si1.6MBe of this FPGA module must reach 1.6MB GB in order to ensure normal operation. A total of 16825 LABs/CLBs are included in this FPGA. There is a 1V power supply that is required to operate it. Typically, it uses a crystal oscillating at 1098MHz in order to operate. Programs and data can be stored in the 1GB memory embedded in this FPGA module. A total of 269200 registers are used for storing and transferring data between them. A DDR3 memory provides data storage and avoids resource conflicts.
XC7A200T-1FFG1156I Features
500 I/Os
Up to 13455360 RAM bits
269200 registers
XC7A200T-1FFG1156I Applications
There are a lot of Xilinx Inc. XC7A200T-1FFG1156I FPGAs applications.
- Wired Communications
- Development Boards and Shields for Microcontrollers
- Enterprise networking
- Medical Applications
- ASIC prototyping
- Medical Electronics
- High Performance Computing
- Defense Applications
- Industrial,Medical and Scientific Instruments
- Voice recognition
