XC7A200T-2SBG484I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 484-FBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Artix-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 484 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.95V~1.05V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Base Part Number | XC7A200T |
| Pin Count | 484 |
| JESD-30 Code | S-PBGA-B484 |
| Number of Outputs | 285 |
| Power Supplies | 1V |
| Memory Size | 1GB |
| Number of I/O | 285 |
| RAM Size | 1.6MB |
| Memory Type | DDR3 |
| Clock Frequency | 1286MHz |
| Propagation Delay | 110 ps |
| Turn On Delay Time | 110 ps |
| Number of Inputs | 285 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 215360 |
| Total RAM Bits | 13455360 |
| Number of LABs/CLBs | 16825 |
| Speed Grade | -2 |
| Number of Registers | 269200 |
| Combinatorial Delay of a CLB-Max | 1.05 ns |
| Height Seated (Max) | 2.44mm |
| Length | 19mm |
| Width | 19mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC7A200T-2SBG484I Overview
The package that contains this software is called 484-FBGA, FCBGA. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. The device has 285 I/O ports for more coherent data transfer. A fundamental building block consists of 215360 logic elements/cells. Supply voltage is 1V volts. A Field Programmable Gate Arrays-series FPGA part. This FPGA module can be attached to the development board with a Surface Mount. The supply voltage of the device is 0.95V~1.05V , at which it runs. The Artix-7 series FPGA is a type of FPGA that belongs to the Artix-7 family of FPGAs. While operating, the operating temperature should be kept within a range of -40°C~100°C TJ. A total of 285 outputs are incorporated into this device. There is an FPGA model contained in Tray in order to conserve space. Total terminations are 484. This device is equipped with 13455360 RAM bits in terms of its RAM si13455360e. XC7A200T is the base part number that can be used to identify related parts. This FPGA module has a RAM si1.6MBe of 1.6MB that is sufficient to make sure that the program is able to run normally. The FPGA is built as an array of 16825 latches or CLBs. It is powered by a 1V battery, which can be purchased separately. I am going to present you with a device that is equipped with 484 pins. Typically, it uses a crystal oscillating at 1286MHz in order to operate. Data and programs can be stored in this FPGA module's memory of 1GB. The structure of the registers used to store and transfer data consists of 269200 registers. DDR3 memory is adapted for storing data and preventing resource conflicts.
XC7A200T-2SBG484I Features
285 I/Os
Up to 13455360 RAM bits
269200 registers
XC7A200T-2SBG484I Applications
There are a lot of Xilinx Inc. XC7A200T-2SBG484I FPGAs applications.
- Data Mining
- Filtering and communication encoding
- High Performance Computing
- Device controllers
- Cryptography
- Telecommunication
- Embedded Vision
- ADAS
- Data center hardware accelerators
- Consumer Electronics
