XC7K325T-1FFG900I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 900-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Kintex®-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 900 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.97V~1.03V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7K325T |
| Pin Count | 900 |
| JESD-30 Code | S-PBGA-B900 |
| Number of Outputs | 500 |
| Qualification Status | Not Qualified |
| Power Supplies | 11.83.3V |
| Memory Size | 1GB |
| Number of I/O | 500 |
| RAM Size | 2MB |
| Memory Type | DDR3 |
| Clock Frequency | 1098MHz |
| Number of Inputs | 500 |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 326080 |
| Total RAM Bits | 16404480 |
| Number of LABs/CLBs | 25475 |
| Speed Grade | -1 |
| Number of Registers | 407600 |
| Combinatorial Delay of a CLB-Max | 0.74 ns |
| Height Seated (Max) | 3.35mm |
| Length | 31mm |
| Width | 31mm |
| RoHS Status | ROHS3 Compliant |
XC7K325T-1FFG900I Overview
As part of the 900-BBGA, FCBGA package, it is included. This kind of FPGA is composed of FIELD PROGRAMMABLE GATE ARRAY. The I/Os are designed to facilitate a more coherent transfer of data. There are 326080 logic elements/cells to form a fundamental building block. It is powered from a supply voltage of 1V. An FPGA part from the Field Programmable Gate Arrays family. The Surface Mount-slot connector on the FPGA module can be connected to the development board. A supply voltage of 0.97V~1.03V is needed in order for fpga chips to operate. FPGAs belonging to the Kintex?-7 series are a type of FPGA that belong to the Kintex?-7 series of FPGAs. Fpga chips is necessary to keep the operating temperature wFpga chipshin -40°C~100°C TJ when the device is operating. A device such as this one has 500 outputs built into it. A model of this FPGA is contained in Tray for the purpose of saving space. Total terminations are 900. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 16404480 bFpga chipss. Its base part number XC7K325T can be used to find parts that are related to it. This FPGA module has a RAM si2MBe of 2MB that is sufficient to make sure that the program is able to run normally. A total of 25475 LABs/CLBs are included in this FPGA. An external power supply of 11.83.3V is required to power the device. Fpga semiconductor is equipped wfpga semiconductorh 900 pin count. Most of the time, it uses a crystal oscillating at 1098MHz to generate the signal. There is a memory of 1GB embedded inside this FPGA module that can be used to store programs and data. To store and transfer data, there are 407600 registers that are used. DDR3 memory is adapted for storing data and preventing resource conflicts.
XC7K325T-1FFG900I Features
500 I/Os
Up to 16404480 RAM bits
407600 registers
XC7K325T-1FFG900I Applications
There are a lot of Xilinx Inc. XC7K325T-1FFG900I FPGAs applications.
- Audio
- Device controllers
- Filtering and communication encoding
- Image processing
- Aerospace and Defense
- Consumer Electronics
- Defense Applications
- Computer hardware emulation
- Medical imaging
- Distributed Monetary Systems
