XC7K325T-2FBG900C
| Parameters | |
|---|---|
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.97V~1.03V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7K325T |
| Pin Count | 900 |
| Number of Outputs | 500 |
| Qualification Status | Not Qualified |
| Power Supplies | 11.83.3V |
| Memory Size | 1GB |
| Number of I/O | 500 |
| RAM Size | 2MB |
| Memory Type | DDR3 |
| Clock Frequency | 1818MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 326080 |
| Total RAM Bits | 16404480 |
| Number of LABs/CLBs | 25475 |
| Speed Grade | -2 |
| Number of Registers | 407600 |
| Combinatorial Delay of a CLB-Max | 0.61 ns |
| Height Seated (Max) | 2.54mm |
| Length | 31mm |
| Width | 31mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 900-BBGA, FCBGA |
| Surface Mount | YES |
| Number of Pins | 900 |
| Operating Temperature | 0°C~85°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Kintex®-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 900 |
XC7K325T-2FBG900C Overview
Fpga chips is supplied in the 900-BBGA, FCBGA package. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. There are 500 I/Os for better data transfer. A fundamental building block consists of 326080 logic elements/cells. Power is provided by a 1V-volt supply. The Field Programmable Gate Arrays family of FPGAs includes this part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. There is a 0.97V~1.03V-volt supply voltage required for the device to operate. An FPGA belonging to the Kintex?-7 series is referred to as an FPGA. Operating temperatures should be maintained within the 0°C~85°C TJ range at all times when the unit is in use. During the installation of this device, 500 outputs were incorporated. It is for space saving reasons that this FPGA model is contained in Tray. The total number of terminations is 900. There are 16404480 RAM bits that are available with this device. Parts related to this part can be found using its base part number XC7K325T. The RAM si2MBe of this FPGA module reaches 2MB so as to guarantee the normal operation of the program during operation. This cable has 900 pins and is designed to connect to a computer. 25475 LABs/CLBs are configured on this FPGA. The device runs on a 11.83.3V battery and requires no additional power supply to operate. I am going to present you with a device that is equipped with 900 pins. Typically, it uses a crystal oscillating at 1818MHz in order to operate. There is a memory of 1GB embedded in this FPGA module, which can be used for storing programs and data. During the process of storing and transferring data, 407600 registers are used. Data is stored in the DDR3 memory, so resource conflicts are avoided.
XC7K325T-2FBG900C Features
500 I/Os
Up to 16404480 RAM bits
900 LABs/CLBs
407600 registers
XC7K325T-2FBG900C Applications
There are a lot of Xilinx Inc. XC7K325T-2FBG900C FPGAs applications.
- Telecommunication
- Cryptography
- High Performance Computing
- Data Mining
- Solar Energy
- Device controllers
- Automotive advanced driver assistance systems (ADAS)
- Military Temperature
- Security systems
- Computer hardware emulation
