XC7K410T-1FFG676C
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2010 |
| Series | Kintex®-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 676 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.97V~1.03V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7K410T |
| Pin Count | 676 |
| Number of Outputs | 400 |
| Qualification Status | Not Qualified |
| Power Supplies | 11.83.3V |
| Number of I/O | 400 |
| RAM Size | 3.5MB |
| Clock Frequency | 1098MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 406720 |
| Total RAM Bits | 29306880 |
| Number of LABs/CLBs | 31775 |
| Speed Grade | -1 |
| Number of Registers | 508400 |
| Combinatorial Delay of a CLB-Max | 0.74 ns |
| Height Seated (Max) | 3.37mm |
| Length | 27mm |
| Width | 27mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 676-BBGA, FCBGA |
| Surface Mount | YES |
| Number of Pins | 676 |
| Operating Temperature | 0°C~85°C TJ |
XC7K410T-1FFG676C Overview
The package that contains this software is called 676-BBGA, FCBGA. Fpga chips consists of FIELD PROGRAMMABLE GATE ARRAY elements. There are 400 I/Os for better data transfer. A fundamental building block consists of 406720 logic elements/cells. It is powered from a supply voltage of 1V. Field Programmable Gate Arrays family FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. A supply voltage of 0.97V~1.03V is needed in order for fpga chips to operate. An FPGA belonging to the Kintex?-7 series is referred to as an FPGA. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~85°C TJ at all times. In this device, 400 outputs are incorporated in order to provide you with maximum flexibility. It is for space saving reasons that this FPGA model is contained in Tray. In total, it has 676 terminations on each end. Fpga chips is important to note that this device has a RAM capacFpga chipsy of 29306880 bFpga chipss. You can find related parts by using the part number XC7K410T, which is its base part number. It is crucial that the RAM si3.5MBe of this FPGA module reaches 3.5MB so that the program can run normally. There are 676 pins on this device. The FPGA is built as an array of 31775 latches or CLBs. Powered by a 11.83.3V power supply, it can be operated by almost anyone. As far as the pin count is concerned, it has 676 pins. Most of the time, it uses a crystal oscillating at 1098MHz to generate the signal. Fpga semiconductor is important to note that the data is stored and transferred in 508400 different registers.
XC7K410T-1FFG676C Features
400 I/Os
Up to 29306880 RAM bits
676 LABs/CLBs
508400 registers
XC7K410T-1FFG676C Applications
There are a lot of Xilinx Inc. XC7K410T-1FFG676C FPGAs applications.
- Data center search engines
- Software-defined radios
- Device controllers
- Wireless Communications
- Enterprise networking
- Telecommunication
- Audio
- Software-defined radio
- Data center hardware accelerators
- Broadcast
