XC7K70T-3FBG484E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA, FCBGA |
| Surface Mount | YES |
| Number of Pins | 484 |
| Operating Temperature | 0°C~100°C TJ |
| Packaging | Tray |
| Published | 2010 |
| Series | Kintex®-7 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 484 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Field Programmable Gate Arrays |
| Technology | CMOS |
| Voltage - Supply | 0.97V~1.03V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XC7K70T |
| Pin Count | 484 |
| Number of Outputs | 285 |
| Qualification Status | Not Qualified |
| Power Supplies | 11.83.3V |
| Number of I/O | 285 |
| RAM Size | 607.5kB |
| Clock Frequency | 1412MHz |
| Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY |
| Number of Logic Elements/Cells | 65600 |
| Total RAM Bits | 4976640 |
| Number of LABs/CLBs | 5125 |
| Speed Grade | -3 |
| Number of Registers | 82000 |
| Combinatorial Delay of a CLB-Max | 0.58 ns |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | ROHS3 Compliant |
XC7K70T-3FBG484E Overview
There are two packages that contain fpga chips: 484-BBGA, FCBGA package and X package. In this kind of FPGA, FIELD PROGRAMMABLE GATE ARRAY is used. Fpga chips is programmed wFpga chipsh 285 I/Os for transferring data in a more coherent manner. There are 65600 logic elements/cells to form a fundamental building block. Fpga chips is powered from a supply voltage of 1V. There is a Field Programmable Gate Arrays family component in this FPGA part. The Surface Mount-slot connector on the FPGA module can be connected to the development board. This device is powered by a 0.97V~1.03V battery. This is a type of FPGA that is part of the Kintex?-7 series of FPGAs. As far as the operating temperature is concerned, it should be kept within 0°C~100°C TJ when operating. During the installation of this device, 285 outputs were incorporated. Unlike other FPGA models, this one is contained in Tray for the sake of space saving. 484 terminations are present in total. This device is equipped with 4976640 RAM bits in terms of its RAM si4976640e. In order to find related parts, you can use its base part number XC7K70T. It is crucial that the RAM si607.5kBe of this FPGA module reaches 607.5kB so that the program can run normally. There are 484 pins on this device. The FPGA consists of 5125 LABs/CLBs. Powered by a 11.83.3V power supply, it can be operated by almost anyone. Fpga semiconductor is equipped wfpga semiconductorh 484 pin count. Most of the time, it uses a crystal oscillating at 1412MHz to generate the signal. As a result, there are 82000 registers which are used to store and transfer data.
XC7K70T-3FBG484E Features
285 I/Os
Up to 4976640 RAM bits
484 LABs/CLBs
82000 registers
XC7K70T-3FBG484E Applications
There are a lot of Xilinx Inc. XC7K70T-3FBG484E FPGAs applications.
- Security systems
- Automotive driver's assistance
- High Performance Computing
- Electronic Warfare
- Bioinformatics
- Radar and Sensors
- Telecommunication
- Wired Communications
- Development Boards and Shields for Microcontrollers
- ADAS
