XC7Z007S-1CLG225I
| Parameters | |
|---|---|
| Core Processor | Single ARM® Cortex®-A9 MPCore™ with CoreSight™ |
| Peripherals | DMA |
| Clock Frequency | 667MHz |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Architecture | MCU, FPGA |
| Boundary Scan | YES |
| RAM (words) | 256000 |
| Primary Attributes | Artix™-7 FPGA, 23K Logic Cells |
| Bus Compatibility | CAN; ETHERNET; I2C; SPI; UART; USB |
| Height Seated (Max) | 1.5mm |
| Length | 13mm |
| Width | 13mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 225-LFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2016 |
| Series | Zynq®-7000 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 225 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B225 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Number of I/O | 54 |
| Speed | 667MHz |
| RAM Size | 256KB |
This SoC is built on Single ARM? Cortex?-A9 MPCore? with CoreSight? core processor(s).
A core processor Single ARM? Cortex?-A9 MPCore? with CoreSight? is embedded in this SoC.Manufacturer assigns package 225-LFBGA, CSPBGA to this system on a chip.With 256KB RAM implemented, this SoC chip provides users with reliable performance.Internally, this SoC design uses the MCU, FPGA technique.A system on chip SoC of this type belongs to the Zynq?-7000 series.The average operating temps for this SoC meaning should be -40°C~100°C TJ.A significant feature of this SoC security is the combination of Artix?-7 FPGA, 23K Logic Cells.This SoC system on a chip has been designed in a state-of-the-art Tray package.54 I/Os are included in this SoC part.A 1V power supply is recommended.In the SoCs wireless, high voltages above 1.05V are considered dangerous and should not be used.It can feed on a power supply of at least 0.95V.In total, there are 225 terminations, which makes system on a chip possible.There is 667MHz clock frequency for this SoC.
Single ARM? Cortex?-A9 MPCore? with CoreSight? processor.
256KB RAM.
Built on MCU, FPGA.
Clock Frequency: 667MHz
There are a lot of Xilinx Inc.
XC7Z007S-1CLG225I System On Chip (SoC) applications.
- Sports
- Fitness
- Three phase UPS
- POS Terminals
- Industrial robot
- Robotics
- Temperature Sensors
- Smartphone accessories
- DC-input BLDC motor drive
- Digital Signal Processing
