XC7Z045-1FFG676I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Package / Case | 676-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | Zynq®-7000 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 676 |
| ECCN Code | 3A991.D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Frequency | 667MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC7Z045 |
| Pin Count | 676 |
| JESD-30 Code | S-PBGA-B676 |
| Operating Supply Voltage | 1V |
| Supply Voltage-Max (Vsup) | 1.05V |
| Power Supplies | 11.8V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, MMC, SD, SDIO, SPI, UART, USART, USB |
| Number of I/O | 130 |
| RAM Size | 256KB |
| Memory Type | ROMless |
| Core Processor | Dual ARM® Cortex®-A9 MPCore™ with CoreSight™ |
| Peripherals | DMA |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Architecture | MCU, FPGA |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Speed Grade | -1 |
| RAM (words) | 256000 |
| Primary Attributes | Kintex™-7 FPGA, 350K Logic Cells |
| Bus Compatibility | CAN; ETHERNET; I2C; SPI; UART; USB |
| UV Erasable | N |
| Height Seated (Max) | 3.37mm |
| Length | 27mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
This SoC is built on Dual ARM? Cortex?-A9 MPCore? with CoreSight? core processor(s).
A core processor Dual ARM? Cortex?-A9 MPCore? with CoreSight? is used to build this SoC.The manufacturer assigns this system on a chip with a 676-BBGA, FCBGA package.With 256KB RAM implemented, this SoC chip provides reliable operation.The internal architecture of this SoC design is based on the MCU, FPGA technique.Zynq?-7000 is the series in which this system on chip SoC falls under.As a rule of thumb, the average operating temperature for this SoC meaning should be -40°C~100°C TJ.Taking note of the fact that this SoC security combines Kintex?-7 FPGA, 350K Logic Cells is important.There is a state-of-the-art Tray package that houses this SoC system on a chip.An integral part of this SoC consists of a total of 130 I/Os.A power supply with a 1V rating is recommended.For the SoCs wireless, a voltage higher than 1.05V is considered unsafe.In total, there are 676 terminations, which makes system on a chip possible.There is no doubt that this system on a chip is outstanding, just as other high-quality Other uPs/uCs/Peripheral ICs will do.System on chip requires 11.8V power supplies.By searching XC7Z045, you can find system on chips with similar specs and purposes.A frequency of 667MHz is used by the wireless SoC to operate.This SoC meaning utilizes a core architecture of ARM as its foundation.
Dual ARM? Cortex?-A9 MPCore? with CoreSight? processor.
256KB RAM.
Built on MCU, FPGA.
Core Architecture: ARM
There are a lot of Xilinx Inc.
XC7Z045-1FFG676I System On Chip (SoC) applications.
- Smart appliances
- Microcontroller based SoC ( RISC-V, ARM)
- Smartphones
- Microprocessors
- RISC-V
- Robotics
- Measurement testers
- Print Special Issue Flyer
- Temperature Sensors
- Efficient hardware for inference of neural networks
