XC95144XL-10TQG100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95144XL |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 81 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3200 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 144 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XC95144XL-10TQG100C Overview
There are 144 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].It is programmed with 81 I/Os.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.There is 3.3V voltage supply for this device.This part is part of the family [0].The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended to mount the chip by Surface Mount.FPGAs belonging to the XC9500XLseries contain this type of chip.The chip is programmed with 100 pins.It is also possible to find YESwhen using this device.The XC95144XLindicates that related parts can be found.A digital circuit is built using 3200gates.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.It is designed with 100 pins.This device operates at a voltage of 3.6Vas its maximum supply voltage.A minimum supply voltage of 3V is required for it to operate.This can be achieved at a frequency of 100MHz.In order to form a fundamental building block, there are 8logic elements/cells.
XC95144XL-10TQG100C Features
100-LQFP package
81 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
XC95144XL-10TQG100C Applications
There are a lot of Xilinx Inc. XC95144XL-10TQG100C CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ROM patching
- Code converters
- Software-driven hardware configuration
- Synchronous or asynchronous mode
- Timing control
- Boolean function generators
- Pattern recognition
- ON-CHIP OSCILLATOR CIRCUIT
- Multiple Clock Source Selection
