XC95144XL-7CS144C
| Parameters | |
|---|---|
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-TFBGA, CSPBGA |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95144XL |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 117 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3200 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 144 |
| JTAG BST | YES |
XC95144XL-7CS144C Overview
144 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].The device is programmed with 117 I/Os.The device is programmed with 144 terminations.The terminal position of this electrical component is BOTTOM.Power is provided by a supply voltage of 3.3V volts.It is a part of the family [0].It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is mounted in the way of Surface Mount.It belongs to the XC9500XLseries of FPGAs.It is programmed with 144 pins.You can find its related parts in the [0].In digital circuits, there are 3200gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In order to store data, FLASHis used.Surface Mountis the mounting point of this electronic part.In this case, the maximum supply voltage (Vsup) is 3.6V.It is important to make sure that the maximum frequency is less than 125MHz.Fundamental building blocks consist of 8logic elements/cells.
XC95144XL-7CS144C Features
144-TFBGA, CSPBGA package
117 I/Os
The operating temperature of 0°C~70°C TA
144 pin count
XC95144XL-7CS144C Applications
There are a lot of Xilinx Inc. XC95144XL-7CS144C CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Address decoders
- High speed graphics processing
- POWER-SAVING MODES
- Random logic replacement
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Timing control
- Storage Cards and Storage Racks
- Software-driven hardware configuration
- Complex programmable logic devices
