XC95144XV-5TQ100C
| Parameters | |
|---|---|
| Package / Case | TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 2.62V |
| Temperature Grade | COMMERCIAL |
| Number of I/O | 81 |
| Memory Type | FLASH |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Frequency (Max) | 222.2MHz |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 144 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
XC95144XV-5TQ100C Overview
The mobile phone network has 144 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a TQFP package containing it.This device has 81 I/O ports programmed into it.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 2.5V.It belongs to the family [0].There are 100 pins on the chip.It is also possible to find YESwhen using this device.High efficiency requires the supply voltage to be maintained at [0].In order to store data, FLASHis used.There are 100pins on it.A maximum supply voltage (Vsup) of 2.62V is provided.Ideally, the operating temperature should be greater than 0°C.Ideally, the operating temperature should be below 70°C.8logic blocks (LABs) make up this circuit.It is recommended that the maximum frequency is less than 0.
XC95144XV-5TQ100C Features
TQFP package
81 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
XC95144XV-5TQ100C Applications
There are a lot of Xilinx XC95144XV-5TQ100C CPLDs applications.
- Battery operated portable devices
- ROM patching
- Portable digital devices
- High speed graphics processing
- Software Configuration of Add-In Boards
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- USB Bus
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
