XC95288-20BGG352C
| Parameters | |
|---|---|
| Output Function | MACROCELL |
| Height Seated (Max) | 1.7mm |
| Length | 35mm |
| Width | 35mm |
| RoHS Status | Non-RoHS Compliant |
| Surface Mount | YES |
| Published | 1996 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 352 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn95.5Ag4.0Cu0.5) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 352 |
| JESD-30 Code | S-PBGA-B352 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of I/O | 192 |
| Clock Frequency | 50MHz |
| Propagation Delay | 20 ns |
| Organization | 0 DEDICATED INPUTS, 192 I/O |
| Programmable Logic Type | FLASH PLD |
| Number of Logic Blocks (LABs) | 8 |
XC95288-20BGG352C Overview
There are 192 I/Os on the board.352terminations have been programmed into the device.This electrical part has a terminal position of BOTTOMand is connected to the ground.A voltage of 5Vprovides power to the device.In this chip, the 352pins are programmed.If high efficiency is to be achieved, the supply voltage should be maintained at [0].8logic blocks (LABs) make up this circuit.clock frequency should not exceed [0].Programmable logic types can be divided into FLASH PLD.A temperature below 70°Cshould be maintained during operation.
XC95288-20BGG352C Features
192 I/Os
352 pin count
8 logic blocks (LABs)
XC95288-20BGG352C Applications
There are a lot of Xilinx XC95288-20BGG352C CPLDs applications.
- Code converters
- Battery operated portable devices
- Address decoding
- Dedicated input registers
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Power automation
- I/O expansion
- Boolean function generators
- State machine control
- State machine design
