XC95288-20HQ208I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP Exposed Pad |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95288 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 168 |
| Clock Frequency | 50MHz |
| Propagation Delay | 20 ns |
| Number of Gates | 6400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 288 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 20ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC95288-20HQ208I Overview
Currently, there are 288 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 208-BFQFP Exposed Pad package.As you can see, this device has 168 I/O ports programmed into it.There is a 208terminations set on devices.There is a QUADterminal position on the electrical part in question.There is 5V voltage supply for this device.The part is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.The XC9500series FPGA is one of these types.It is equipped with 208 pin count.It is also possible to find YESwhen using this device.According to the XC95288, its related parts can be found.As a building block for digital circuits, there are 6400gates.This electronic part is mounted in the way of Surface Mount.The pins are [0].In total, there are 16 logic elements/blocks.The system runs on a power supply of 3.3/55V watts.A maximum supply voltage (Vsup) of 5.5V is provided.Vsup (supply voltage) must be greater than 4.5V.Its clock frequency should not exceed 50MHz.
XC95288-20HQ208I Features
208-BFQFP Exposed Pad package
168 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
3.3/55V power supplies
XC95288-20HQ208I Applications
There are a lot of Xilinx Inc. XC95288-20HQ208I CPLDs applications.
- Handheld digital devices
- Code converters
- Page register
- PULSE WIDTH MODULATION (PWM)
- Wide Vin Industrial low power SMPS
- ROM patching
- I/O PORTS (MCU MODULE)
- Battery operated portable devices
- POWER-SAVING MODES
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
