XC95288XL-10PQ208I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95288XL |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 168 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6400 |
| Max Frequency | 100MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 288 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
XC95288XL-10PQ208I Overview
A mobile phone network consists of 288macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).208-BFQFPis the package in which it resides.The device is programmed with 168 I/Os.It is programmed to terminate devices at [0].The terminal position of this electrical component is QUAD.It is powered by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the XC9500XL series.It has 208pins programmed.When using this device, YEScan also be found.There are related parts in [0].A digital circuit can be constructed using 6400gates.For high efficiency, the supply voltage should be maintained at [0].FLASH is adopted for storing data.Surface Mountmounts this electronic component.The 208pins are designed into the board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for this device to operate.It is recommended that the maximum frequency be less than 100MHz.A fundamental building block of logic consists of 16logic elements/cells.
XC95288XL-10PQ208I Features
208-BFQFP package
168 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
XC95288XL-10PQ208I Applications
There are a lot of Xilinx Inc. XC95288XL-10PQ208I CPLDs applications.
- Interface bridging
- Page register
- D/T registers and latches
- PLC analog input modules
- Software-driven hardware configuration
- Power automation
- Auxiliary Power Supply Isolated and Non-isolated
- Storage Cards and Storage Racks
- Reset swapping
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
