XC95288XL-7TQ144I
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95288XL |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 117 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6400 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 288 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
XC95288XL-7TQ144I Overview
There are 288 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 144-LQFP package.It is equipped with 117I/O ports.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.It is powered by a voltage of 3.3V volts.This part is part of the family [0].Trayis the packaging method.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The XC9500XLseries FPGA is one of these types.Chips are programmed with 144 pins.When using this device, YESis also available.Its related parts can be found in the [0].6400gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.FLASH is adopted for storing data.Surface Mountmounts this electronic component.There are 144 pins embedded in the device.A maximum supply voltage of 3.6Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.The maximal frequency should be lower than 125MHz.An elementary building block consists of 16logic elements/cells.
XC95288XL-7TQ144I Features
144-LQFP package
117 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
XC95288XL-7TQ144I Applications
There are a lot of Xilinx Inc. XC95288XL-7TQ144I CPLDs applications.
- Multiple DIP Switch Replacement
- Multiple Clock Source Selection
- POWER-SAVING MODES
- Software-Driven Hardware Configuration
- Parity generators
- PLC analog input modules
- Field programmable gate
- Battery operated portable devices
- Digital designs
- Programmable power management
