XC95288XL-7TQG144I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC95288XL |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 117 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Gates | 6400 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 288 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC95288XL-7TQG144I Overview
The mobile phone network has 288 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].It is programmed with 117 I/Os.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].Ideally, the chip should be packaged by Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the XC9500XL series.Chips are programmed with 144 pins.When using this device, YEScan also be found.The XC95288XLcan be used to identify its related parts.For digital circuits, there are 6400gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.The pins are [0].There is a maximum supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.The frequency that can be achieved is 125MHz.There are 16 logic elements/cells on the device.
XC95288XL-7TQG144I Features
144-LQFP package
117 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
XC95288XL-7TQG144I Applications
There are a lot of Xilinx Inc. XC95288XL-7TQG144I CPLDs applications.
- POWER-SAVING MODES
- Discrete logic functions
- Parity generators
- Digital designs
- ROM patching
- ToR/Aggregation/Core Switch and Router
- Preset swapping
- Field programmable gate
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
