XC9536XL-10VQ64I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9536XL |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 100MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 36 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9536XL-10VQ64I Overview
There are 36 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a 64-TQFP package.The device is programmed with 36 I/Os.64terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.There is 3.3V voltage supply for this device.It belongs to the family [0].It is recommended to package the chip by Tray.Ensure its reliability by operating at [0].Surface Mountshould be used for mounting the chip.It belongs to the XC9500XLseries of FPGAs.The chip is programmed with 64 pins.The XC9536XLindicates that its related parts can be found.800gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].The electronic component is mounted by Surface Mount.The 64pins are designed into the board.There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.Ideally, the maximal frequency should be lower than 100MHz Hz.A fundamental building block of logic consists of 2logic elements/cells.
XC9536XL-10VQ64I Features
64-TQFP package
36 I/Os
The operating temperature of -40°C~85°C TA
64 pin count
64 pins
XC9536XL-10VQ64I Applications
There are a lot of Xilinx Inc. XC9536XL-10VQ64I CPLDs applications.
- Page register
- USB Bus
- Digital systems
- STANDARD SERIAL INTERFACE UART
- Programmable power management
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Timing control
- Battery operated portable devices
- Custom shift registers
- Custom state machines
