XC9572XL-10CS48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 38 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 100MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.8mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9572XL-10CS48C Overview
A mobile phone network consists of 72macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a 48-FBGA, CSPBGA package.The device is programmed with 38 I/Os.48terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.The XC9500XLseries FPGA is one of these types.The chip is programmed with 48 pins.The XC9572XLindicates that its related parts can be found.For digital circuits, there are 1600gates. These devices serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].This electronic part is mounted in the way of Surface Mount.A total of 48pins are provided on this board.It operates with the maximal supply voltage of 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.It should be below 100MHzat the maximal frequency.There are 4 logic elements/cells on the device.
XC9572XL-10CS48C Features
48-FBGA, CSPBGA package
38 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
XC9572XL-10CS48C Applications
There are a lot of Xilinx Inc. XC9572XL-10CS48C CPLDs applications.
- Protection relays
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I2C BUS INTERFACE
- Custom state machines
- Power Meter SMPS
- Address decoders
- I/O expansion
- D/T registers and latches
- Dedicated input registers
- State machine control
