XC9572XL-10PCG44C
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
XC9572XL-10PCG44C Overview
There are 72 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 44-LCC (J-Lead)package, you will find it.There are 34 I/Os on the board.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Tubeshould be used for packaging the chip.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the XC9500XL series.It has 44pins programmed.The XC9572XLshows its related parts.In digital circuits, 1600gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.The device is designed with pins [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.There can be 100MHz frequency achieved.Fundamental building blocks consist of 4logic elements/cells.
XC9572XL-10PCG44C Features
44-LCC (J-Lead) package
34 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
XC9572XL-10PCG44C Applications
There are a lot of Xilinx Inc. XC9572XL-10PCG44C CPLDs applications.
- Dedicated input registers
- Multiple DIP Switch Replacement
- D/T registers and latches
- ON-CHIP OSCILLATOR CIRCUIT
- Programmable polarity
- DDC INTERFACE
- I2C BUS INTERFACE
- PLC analog input modules
- Wide Vin Industrial low power SMPS
- Multiple Clock Source Selection
