XC9572XL-10VQ44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 34 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 100MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9572XL-10VQ44C Overview
There are 72 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 44-TQFP package.As you can see, this device has 34 I/O ports programmed into it.44terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered by a voltage of 3.3V volts.It belongs to the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.In this case, it is a type of FPGA belonging to the XC9500XL series.There are 44 pins on the chip.The XC9572XLcontains its related parts.A digital circuit is built using 1600gates.If high efficiency is desired, the supply voltage should be kept at [0].For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.This board has 44 pins.Vsup reaches 3.6Vas the maximum supply voltage.The maximal frequency should be lower than 100MHz.In order to form a fundamental building block, there are 4 logic elements or cells.
XC9572XL-10VQ44C Features
44-TQFP package
34 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
XC9572XL-10VQ44C Applications
There are a lot of Xilinx Inc. XC9572XL-10VQ44C CPLDs applications.
- High speed graphics processing
- Complex programmable logic devices
- Cross-Matrix Switch
- TIMERS/COUNTERS
- Software-Driven Hardware Configuration
- Discrete logic functions
- PULSE WIDTH MODULATION (PWM)
- Power Meter SMPS
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
