XC9572XL-10VQ64C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 52 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 100MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9572XL-10VQ64C Overview
There are 72 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].It is programmed with 52 I/Os.It is programmed to terminate devices at [0].There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.This part is part of the family [0].Trayshould be used to package the chip.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of XC9500XLseries FPGA.In this chip, the 64pins are programmed.The XC9572XLcontains its related parts.For digital circuits, there are 1600gates. These devices serve as building blocks.The supply voltage should be maintained at 3.3V for high efficiency.In order to store data, FLASHis used.In this case, it is mounted by Surface Mount.64pins are included in its design.It operates with the maximal supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.There should be a lower maximum frequency than 100MHz.Basic building blocks have 4logic elements.
XC9572XL-10VQ64C Features
64-TQFP package
52 I/Os
The operating temperature of 0°C~70°C TA
64 pin count
64 pins
XC9572XL-10VQ64C Applications
There are a lot of Xilinx Inc. XC9572XL-10VQ64C CPLDs applications.
- Software-driven hardware configuration
- Battery operated portable devices
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Digital designs
- Pattern recognition
- POWER-SAVING MODES
- Protection relays
- Configurable Addressing of I/O Boards
- INTERRUPT SYSTEM
- Parity generators
