XC9572XL-10VQG64C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 52 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XC9572XL-10VQG64C Overview
Currently, there are 72 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 64-TQFPpackage, you will find it.There are 52 I/Os on the board.There are 64 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.It is a part of family [0].Trayshould be used to package the chip.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It belongs to the XC9500XLseries of FPGAs.A chip with 64pins is programmed.In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 1600gates.High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.The device has a pinout of [0].This device operates at a voltage of 3.6V when the maximum supply voltage is applied.It is powered by 3Vas its minimum supply voltage.The frequency that can be achieved is 100MHz.The fundamental building block consists of 4logic elements/cells.
XC9572XL-10VQG64C Features
64-TQFP package
52 I/Os
The operating temperature of 0°C~70°C TA
64 pin count
64 pins
XC9572XL-10VQG64C Applications
There are a lot of Xilinx Inc. XC9572XL-10VQG64C CPLDs applications.
- Page register
- Custom state machines
- DMA control
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Preset swapping
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Multiple DIP Switch Replacement
- Software Configuration of Add-In Boards
- ROM patching
- I2C BUS INTERFACE
