XC9572XL-10VQG64I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 52 |
| Memory Type | FLASH |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
XC9572XL-10VQG64I Overview
There are 72 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 64-TQFP package.The device is programmed with 52 I/Os.There are 64 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.There is 3.3V voltage supply for this device.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the XC9500XL series.In this chip, the 64pins are programmed.XC9572XLcontains its related parts.For digital circuits, there are 1600gates. These devices serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.It is designed with 64 pins.There is a maximum supply voltage of 3.6Vwhen the device is operating.The minimal supply voltage is 3V.This frequency can be achieved at 100MHz.There are 4 logic elements/cells to form a fundamental building block.
XC9572XL-10VQG64I Features
64-TQFP package
52 I/Os
The operating temperature of -40°C~85°C TA
64 pin count
64 pins
XC9572XL-10VQG64I Applications
There are a lot of Xilinx Inc. XC9572XL-10VQG64I CPLDs applications.
- Interface bridging
- Discrete logic functions
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Power automation
- Software-driven hardware configuration
- ToR/Aggregation/Core Switch and Router
- Cross-Matrix Switch
- Storage Cards and Storage Racks
- Address decoding
- Wide Vin Industrial low power SMPS
