XC9572XL-7CS48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-FBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 38 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
XC9572XL-7CS48C Overview
72 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.48-FBGA, CSPBGAis the package in which it resides.As a result, it has 38 I/O ports programmed.The termination of a device is set to [0].The terminal position of this electrical component is BOTTOM.A voltage of 3.3Vprovides power to the device.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the XC9500XL series.A chip with 48pins is programmed.The XC9572XLindicates that its related parts can be found.It is possible to construct digital circuits using 1600gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.It is designed with 48 pins.A maximum supply voltage (Vsup) of 3.6V is provided.It is recommended that the maximal frequency be lower than 125MHz.In order to form a fundamental building block, there are 4 logic elements or cells.
XC9572XL-7CS48C Features
48-FBGA, CSPBGA package
38 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
48 pins
XC9572XL-7CS48C Applications
There are a lot of Xilinx Inc. XC9572XL-7CS48C CPLDs applications.
- PLC analog input modules
- Digital designs
- Configurable Addressing of I/O Boards
- Battery operated portable devices
- Protection relays
- INTERRUPT SYSTEM
- D/T registers and latches
- I2C BUS INTERFACE
- Handheld digital devices
- Wide Vin Industrial low power SMPS
