Parameters |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Supply Voltage |
3.3V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Number of I/O |
34 |
Memory Type |
FLASH |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
7.5 ns |
Frequency (Max) |
125MHz |
Number of Logic Blocks (LABs) |
4 |
Speed Grade |
7 |
Output Function |
MACROCELL |
Number of Macro Cells |
72 |
JTAG BST |
YES |
In-System Programmable |
YES |
Length |
16.5862mm |
Width |
16.5862mm |
RoHS Status |
Non-RoHS Compliant |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
XC9572XL-7PC44I Overview
This network has 72macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is enclosed in a PLCC package.This device has 34 I/O ports programmed into it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 3.3V volts.It belongs to the family [0].There are 44pins on the chip.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 3.6V.It is powered by 3Vas its minimum supply voltage.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 85°C.The program consists of 4 logic blocks (LABs).Maximum frequency should be less than 125MHz.
XC9572XL-7PC44I Features
PLCC package
34 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
XC9572XL-7PC44I Applications
There are a lot of Xilinx XC9572XL-7PC44I CPLDs applications.
- Cross-Matrix Switch
- DDC INTERFACE
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Programmable polarity
- Programmable power management
- PULSE WIDTH MODULATION (PWM)
- USB Bus
- TIMERS/COUNTERS
- Wide Vin Industrial low power SMPS