XC9572XL-7VQ44I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
XC9572XL-7VQ44I Overview
Currently, there are 72 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].In this case, there are 34 I/Os programmed.44terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.It is a part of family [0].It is packaged in the way of Tray.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.In terms of FPGAs, it belongs to the XC9500XL series.It is programmed with 44 pins.The XC9572XLindicates that its related parts can be found.The 1600gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].There is a maximum supply voltage of 3.6V.With a minimal supply voltage of [0], it operates.It is recommended not to exceed 125MHzin terms of frequency.In order to form a fundamental building block, there are 4 logic elements or cells.
XC9572XL-7VQ44I Features
44-TQFP package
34 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
XC9572XL-7VQ44I Applications
There are a lot of Xilinx Inc. XC9572XL-7VQ44I CPLDs applications.
- Page register
- Voltage level translation
- ToR/Aggregation/Core Switch and Router
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- I2C BUS INTERFACE
- Software-driven hardware configuration
- Code converters
- DMA control
- Programmable polarity
- Digital designs
