XC9572XL-7VQ64C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Number of I/O | 52 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9572XL-7VQ64C Overview
The mobile phone network has 72 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is embedded in the 64-TQFP package.As a result, it has 52 I/O ports programmed.There are 64 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 3.3V volts.This part is in the family [0].Trayshould be used for packaging the chip.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the XC9500XL series.In this chip, the 64pins are programmed.The XC9572XLindicates that related parts can be found.It is possible to construct digital circuits using 1600gates, which are devices that serve as building blocks.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.The 64pins are designed into the board.In this case, the maximum supply voltage (Vsup) reaches 3.6V.It is recommended that the maximal frequency be lower than 125MHz.There are 4 logic elements/cells on the device.
XC9572XL-7VQ64C Features
64-TQFP package
52 I/Os
The operating temperature of 0°C~70°C TA
64 pin count
64 pins
XC9572XL-7VQ64C Applications
There are a lot of Xilinx Inc. XC9572XL-7VQ64C CPLDs applications.
- Timing control
- Software-driven hardware configuration
- Complex programmable logic devices
- Custom state machines
- Cross-Matrix Switch
- Software-Driven Hardware Configuration
- Parity generators
- POWER-SAVING MODES
- ToR/Aggregation/Core Switch and Router
- TIMERS/COUNTERS
