XC9572XL-7VQ64I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | XC9500XL |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC9572XL |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 52 |
| Memory Type | FLASH |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1600 |
| Max Frequency | 125MHz |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 72 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC9572XL-7VQ64I Overview
There are 72 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.64-TQFPis the package in which it resides.The device has 52inputs and outputs.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.An electrical supply voltage of 3.3V is used to power it.This part is part of the family [0].Trayshould be used for packaging the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.FPGAs belonging to the XC9500XLseries contain this type of chip.Chips are programmed with 64 pins.The XC9572XLcontains its related parts.1600gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.It is adopted to store data in [0].The electronic component is mounted by Surface Mount.This board has 64 pins.There is a maximum supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.The maximal frequency should be lower than 125MHz.There are 4 logic elements/cells on the device.
XC9572XL-7VQ64I Features
64-TQFP package
52 I/Os
The operating temperature of -40°C~85°C TA
64 pin count
64 pins
XC9572XL-7VQ64I Applications
There are a lot of Xilinx Inc. XC9572XL-7VQ64I CPLDs applications.
- Complex programmable logic devices
- Code converters
- Random logic replacement
- Boolean function generators
- Storage Cards and Storage Racks
- STANDARD SERIAL INTERFACE UART
- High speed graphics processing
- Programmable polarity
- Timing control
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
