XCF01SVOG20C
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*S |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Interface | Parallel, Serial |
| Memory Size | 1Mb |
| Memory Type | FLASH |
| Operating Mode | SYNCHRONOUS |
| Supply Current-Max | 0.01mA |
| Organization | 1MX1 |
| Standby Current-Max | 0.001A |
| Memory Density | 1048576 bit |
| Data Retention Time-Min | 20 |
| Height | 1.04mm |
| Length | 6.5mm |
| Width | 4.39mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
XCF01SVOG20C Overview
The package uses a neat 20-TSSOP (0.173, 4.40mm Width) interface.Packaging for the external use of Tube.A qualified individual to operate within -40°C~85°C is required.Using the In System Programmable axis, it can be programmed to do whatever you want.With a voltage of 3V~3.6V, it is powered.There is a memory device mounted in Surface Mount position for this device.The size of data storage is limited to 1Mb.Try searching "XCF*S" for more parts.The supply voltage of the device must be 3.3V in order to operate correctly.Different functions can be assigned to 20 terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.3V must be the minimum voltage supplied to the device.If reflow soldering is being performed, the temperature should not be higher than 260 when soldering should be reflowed.A 20 pin is included in it.A memory chip can operate at a voltage no greater than 0.01mA.20 pins are set with the part.In order for the part to function safely and reliably as part of a circuit, 3.3V recommends that users apply 3.3V to the part prior to use in order to ensure that it will work properly.Memory is also called a FLASH memory.This product is suitable for applications requiring Surface Mount control.There is a frequency of 50MHz used by the switching controller.
XCF01SVOG20C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory
Frequency: 50MHz.
XCF01SVOG20C Applications
There are a lot of Xilinx Inc. XCF01SVOG20C applications of configuration proms for FPGAs.
- cell phones
- data buffer
- Cache memory
- mainframes
- main computer memory
- networking
- personal digital assistants
- DVD disk buffer
- personal computers
- networks
