XCF02SVOG20C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Manufacturer Package Identifier | XCF02SVOG20C |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*S |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Interface | Parallel |
| Memory Size | 2Mb |
| Memory Type | FLASH |
| Operating Mode | SYNCHRONOUS |
| Supply Current-Max | 0.01mA |
| Organization | 2MX1 |
| Standby Current-Max | 0.001A |
| Parallel/Serial | SERIAL |
| Data Retention Time-Min | 20 |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.19mm |
| Length | 6.5mm |
| Width | 4.39mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XCF02SVOG20C Overview
FPGA uses a neat 20-TSSOP (0.173, 4.40mm Width) package.Packaging for the external environment.-40°C~85°C-qualified.Through In System Programmable, it is programmable.There is a voltage of 3V~3.6V applied to the device.This memory device is mounted in Surface Mount.A data storage size of 2Mb is allowed.For other related parts, search "XCF*S".The supply voltage is 3.3V.There are different functions that can be applied on the 20 axis when it comes to terminating.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.It is necessary to supply the device with a minimum voltage of 3V.The temperature should be kept below 260 in reflow soldering.FPGA is equipped wFPGAh 20 pins.In this memory, data is transmitted using the SERIAL process.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.01mA.With the part are included 20 pins.3.3V recommends that users apply 3.3V to the part before using it in a circuit so it can run safely and reliably.Memory is also called a FLASH memory.Applicable to Surface Mount systems.There is a frequency of 50MHz that is used by the switching controller.
XCF02SVOG20C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
SERIAL processing.
FLASH memory
Frequency: 50MHz.
XCF02SVOG20C Applications
There are a lot of Xilinx Inc. XCF02SVOG20C applications of configuration proms for FPGAs.
- Camcorders
- hard disk drive (HDD)
- DVD disk buffer
- multimedia computers
- eSRAM
- nonvolatile BIOS memory
- networks
- supercomputers
- servers
- cell phones
