XCF08PFSG48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*P |
| Pin Count | 48 |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 2V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Interface | Parallel, Serial |
| Memory Size | 8Mb |
| Memory Type | FLASH |
| Supply Current-Max | 0.04mA |
| Organization | 8MX1 |
| Standby Current-Max | 0.001A |
| Memory Density | 8388608 bit |
| Endurance | 20000 Write/Erase Cycles |
| Height | 860μm |
| Length | 9mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XCF08PFSG48C Overview
FPGA uses a nice 48-TFBGA, CSPBGA package that makes FPGA easy to use.Packaging outside of Tray.In the state of -40°C~85°C, licensed to work.Using the In System Programmable axis, it can be programmed to do whatever you want.The voltage is 1.65V~2V.Mounted in Surface Mount is this memory device.Data storage is limited to 8Mb bytes.Other related parts can be found by searching "XCF*P".In order for it to function, it requires a voltage supply of 1.8V.A termination with different functions in the 48 axis.This memory device can be used with a maximum voltage of 2V.Minimum voltage 1.65V is required for the device to work.If you're reflow soldering, you shouldn't go above 260.In this case, it has 48 pins.The memory chip is allowed to operate at a voltage that is no greater than 0.04mA.Parts come with 48 pins.A 1.8V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.This type of memory is called a FLASH memory.In addition, it is suitable for use in Surface Mount-based applications.Swicthing controllers work at 50MHz frequencies.
XCF08PFSG48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory
Frequency: 50MHz.
XCF08PFSG48C Applications
There are a lot of Xilinx Inc. XCF08PFSG48C applications of configuration proms for FPGAs.
- eSRAM
- DVD disk buffer
- embedded logic
- personal digital assistants
- data buffer
- hard disk drive (HDD)
- personal computers
- supercomputers
- workstations,
- Camcorders
