XCF08PVOG48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.724, 18.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*P |
| Pin Count | 48 |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 2V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Interface | Parallel |
| Memory Size | 8Mb |
| Memory Type | FLASH |
| Supply Current-Max | 0.04mA |
| Organization | 8MX1 |
| Standby Current-Max | 0.001A |
| Memory Density | 8388608 bit |
| Parallel/Serial | SERIAL |
| Endurance | 20000 Write/Erase Cycles |
| Ambient Temperature Range High | 85°C |
| Height | 1.2mm |
| Length | 12.1mm |
| Width | 18.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XCF08PVOG48C Overview
A neat 48-TFSOP (0.724, 18.40mm Width) package is used.The external packaging of Tray is made of Tray plastic.Licensed to operate in -40°C~85°C.This device can be programmed using In System Programmable.This device is fed with a voltage of 1.65V~2V which is applied to it.I have mounted this memory device in Surface Mount.8Mb is the maximum storage size.XCF*P will give you other related parts.The supply voltage should be 1.8V.Different functions can be assigned to 48 terminations.In order to use this memory device, a maximum voltage of 2V should be used.If the device needs to be supplied with power, then a minimum voltage of 1.65V is required.In reflow soldering, the temperature should be controlled to a maximum of 260 degrees during the process.The 48 pins are on the board.As a result of the SERIAL process, data is transmitted from this memory.For the memory chip to operate, it requires a voltage not exceeding 0.04mA.Parts include 48 pins.Memory is recommended that users apply 1.8V to the part before use in order for Memory to function safely in a circuMemory.Memory is also called a FLASH memory.Applicable to Surface Mount systems.A swicthing controller operates at a frequency of 50MHz.
XCF08PVOG48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
SERIAL processing.
FLASH memory
Frequency: 50MHz.
XCF08PVOG48C Applications
There are a lot of Xilinx Inc. XCF08PVOG48C applications of configuration proms for FPGAs.
- eSRAM
- printers
- networking
- cell phones
- personal digital assistants
- DVD disk buffer
- supercomputers
- telecommunications
- mainframes
- embedded logic
