banner_page

XCF128XFT64C

Surface Mount 128Mb Mb Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Active XCF128X


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XCF128XFT64C
  • Package: 64-TBGA
  • Datasheet: PDF
  • Stock: 448
  • Description: Surface Mount 128Mb Mb Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Active XCF128X (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 64-TBGA
Number of Pins 64
Operating Temperature -40°C~85°C
Packaging Tray
Published 2007
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 1.7V~2V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 1mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number XCF128X
Pin Count 64
Supply Voltage-Max (Vsup) 2V
Power Supplies 1.81.8/3.3V
Supply Voltage-Min (Vsup) 1.7V
Programmable Type In System Programmable
Memory Size 128Mb
Supply Current-Max 0.053mA
Organization 8MX16
Memory Width 16
Standby Current-Max 0.000075A
Memory Density 134217728 bit
Access Time (Max) 85 ns
Parallel/Serial PARALLEL
Memory IC Type FLASH
Programming Voltage 1.8V
Data Polling NO
Toggle Bit NO
Command User Interface YES
Number of Sectors/Size 4127
Page Size 4words
Ready/Busy YES
Common Flash Interface YES
Height Seated (Max) 1.2mm
Length 13mm
Width 10mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

XCF128XFT64C Overview


The package uses a neat 64-TBGA interface.External packaging of type Tray.A qualified individual to operate within -40°C~85°C is required.This device can be programmed using the In System Programmable language.FPGA is powered by a voltage which is 1.7V~2V volts, and this voltage is the voltage from which the generator is powered.This memory device is mounted in Surface Mount.The size of data storage is limited to 128Mb.You can search "XCF128X" for other related parts.The supply voltage is 1.8V.There are different functions associated with 64 terminations.This memory device can be used with a maximum voltage of 2V.1.7V is the minimum voltage required to supply the device.The memory chip in this picture is called a FLASH memory chip.If you're reflow soldering, you shouldn't go above 225.A 64 pin is included in it.Data is transmitted in this memory using a PARALLEL process.For the memory chip to operate, it requires a voltage not exceeding 0.053mA.64 pins are set with the part.The use of a 1.81.8/3.3V power supply is recommended in order to achieve best results.For applications involving Surface Mount, it is suitable.The type of Flash Memories it is is specific.

XCF128XFT64C Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory IC.
PARALLEL processing.

XCF128XFT64C Applications


There are a lot of Xilinx Inc. XCF128XFT64C applications of configuration proms for FPGAs.

  • eDRAM
  • supercomputers
  • servers
  • embedded logic
  • multimedia computers
  • data buffer
  • hard disk drive (HDD)
  • printers
  • nonvolatile BIOS memory
  • mainframes

Write a review

Note: HTML is not translated!
    Bad           Good