XCF16PFSG48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFBGA, CSPBGA |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Additional Feature | IT CAN ALSO OPERATES AT 2.5, 3.3 VOLT NOMINAL |
| HTS Code | 8542.32.00.51 |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCF*P |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 2V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Interface | Parallel, Serial |
| Memory Size | 16Mb |
| Memory Type | FLASH |
| Operating Mode | SYNCHRONOUS |
| Supply Current-Max | 0.04mA |
| Organization | 16MX1 |
| Memory Density | 16777216 bit |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height | 860μm |
| Length | 9mm |
| Width | 8mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
XCF16PFSG48C Overview
An interesting 48-TFBGA, CSPBGA package is used.Packaging for external use.-40°C~85°C license holder.Using In System Programmable, you can program it.FPGA is powered by a voltage which is 1.65V~2V volts, and this voltage is the voltage from which the generator is powered.I have mounted this memory device in Surface Mount.16Mb is the maximum storage size.In addition to this part, you can search "XCF*P" for other similar parts.The supply voltage is 1.8V.FPGA is possible to connect different functions on the 48 axis at different terminations.There is a maximum voltage of 2V that can be applied to this memory device.1.65V must be the minimum voltage supplied to the device.When soldering in reflow mode, the temperature should be kept below 260 at all times during the soldering process.There are 48 pins on it.The memory chip is allowed to operate from a voltage no higher than 0.04mA.In the package, you will find a set of 48 pins.A 1.8V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.Memory features IT CAN ALSO OPERATES AT 2.5, 3.3 VOLT NOMINAL to better serve the need.In other words, a FLASH memory.In other words, it is suitable for applications using the Surface Mount operating system.There is a frequency of 50MHz that is used by the switching controller.
XCF16PFSG48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
FLASH memory
Frequency: 50MHz.
XCF16PFSG48C Applications
There are a lot of Xilinx Inc. XCF16PFSG48C applications of configuration proms for FPGAs.
- graphics card
- main computer memory
- embedded logic
- nonvolatile BIOS memory
- multimedia computers
- Cache memory
- supercomputers
- cell phones
- Camcorders
- printers
