XCF32PFS48C
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | IT CAN ALSO OPERATES AT 2.5, 3.3 VOLT NOMINAL |
| HTS Code | 8542.32.00.51 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 1.65V~2V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | XCF*P |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 2V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Memory Size | 32Mb |
| Operating Mode | SYNCHRONOUS |
| Supply Current-Max | 0.04mA |
| Organization | 32MX1 |
| Memory Width | 1 |
| Memory Density | 33554432 bit |
| Parallel/Serial | SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 1.2mm |
| Length | 9mm |
| Width | 8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
XCF32PFS48C Overview
48-TFBGA, CSPBGA is used in this package.Packaging for external use.-40°C~85°C-qualified.FPGA is programmable through In System Programmable.A voltage of 1.65V~2V is applied to it in order to power it.The memory device is mounted in Surface Mount.Currently, data storage can only store data up to 32Mb bytes.In addition to this part, you can search "XCF*P" for other similar parts.Supply voltage 1.8V is required.There are different functions that can be applied on the 48 axis when it comes to terminating.FPGA is possible to use this memory device wFPGAh a maximum voltage of 2V.It is necessary to supply the device with a minimum voltage of 1.65V.The memory chip in question is a CONFIGURATION MEMORY memory chip.The reflow soldering process should be done at a temperature no higher than NOT SPECIFIED.A 48 pin is included in it.With the help of SERIAL-processing, data is sent through this memory.An operating voltage of 0.04mA is allowed for the memory chip.48 pins are set with the part.Using 1.8V on the part before use will help the part run safely and reliably in a circuit.Our product line now includes IT CAN ALSO OPERATES AT 2.5, 3.3 VOLT NOMINAL in order to provide a better level of service to our customers.In more specific terms, it is a type of Flash Memories.
XCF32PFS48C Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
XCF32PFS48C Applications
There are a lot of Xilinx Inc. XCF32PFS48C applications of configuration proms for FPGAs.
- eDRAM
- data buffer
- servers
- workstations,
- multimedia computers
- printers
- eSRAM
- embedded logic
- Camcorders
- graphics card
