banner_page

XCF32PVOG48C

Surface Mount 32Mb Mb Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Active XCF*P


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XCF32PVOG48C
  • Package: 48-TFSOP (0.724, 18.40mm Width)
  • Datasheet: PDF
  • Stock: 107
  • Description: Surface Mount 32Mb Mb Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Active XCF*P (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.724, 18.40mm Width)
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tray
Published 1999
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code 3A991.B.1
Terminal Finish Matte Tin (Sn)
HTS Code 8542.32.00.61
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 1.65V~2V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number XCF*P
Pin Count 48
Operating Supply Voltage 1.8V
Supply Voltage-Max (Vsup) 2V
Supply Voltage-Min (Vsup) 1.65V
Programmable Type In System Programmable
Memory Size 32Mb
Supply Current-Max 0.04mA
Organization 32MX1
Standby Current-Max 0.001A
Memory Density 33554432 bit
Parallel/Serial SERIAL
Memory IC Type CONFIGURATION MEMORY
Endurance 20000 Write/Erase Cycles
Data Retention Time-Min 20
Height 1mm
Length 12.1mm
Width 18.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

XCF32PVOG48C Overview


There is a neat 48-TFSOP (0.724, 18.40mm Width) package that is used in this program.Packaging for Tray.-40°C~85°C license holder.In System Programmable is the program that allows it to be programmed.An electric current of 1.65V~2V is applied to it.This memory device is mounted in Surface Mount.A data storage size of 32Mb is allowed.To find other similar parts, search for "XCF*P".1.8V is the voltage it requires as a supply.With different functions, 48 terminations can be used.As long as the maximum voltage of the memory device is 2V, then the memory device can be used.1.65V must be the minimum voltage supplied to the device.Using CONFIGURATION MEMORY memory chips, this is what you get.If you're reflow soldering, you shouldn't go above 260.There are 48 pins on it.By using SERIAL-processing, data can be transmitted through this memory in a secure manner.A memory chip can operate at a voltage no greater than 0.04mA.Parts come with 48 pins set.To run the part safely and stably in a circuit, 1.8V recommends users apply 1.8V on the part.For applications involving Surface Mount, it is suitable.In specific, it can be described as a form of Flash Memories.

XCF32PVOG48C Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.

XCF32PVOG48C Applications


There are a lot of Xilinx Inc. XCF32PVOG48C applications of configuration proms for FPGAs.

  • graphics card
  • Camcorders
  • servers
  • networks
  • mainframes
  • hard disk drive (HDD)
  • multimedia computers
  • eDRAM
  • printers
  • main computer memory

Write a review

Note: HTML is not translated!
    Bad           Good